Blower Motor Installation - Thermador PROFESSIONAL HPCN36NS Installation Manual

Thermador professional chimney hoods
Hide thumbs Also See for PROFESSIONAL HPCN36NS:
Table of Contents

Advertisement

Available languages

Available languages

Blower Motor Installation

Blower
SKU
Remote
VTR630*
Remote
VTR1030*
Remote
VTR1330*
Inline
VTI610*
Inline
VTI1010*
Integral
VTN1080*
* Indicates a letter designating the release year.
** With blower installed.
Table 1: Blower & Circuit Breaker Ratings
HPCB36NS and HPCB48NS models have a VTN1080
integral blower included. All other blower models are sold
separately. Use only THERMADOR blowers with these
ventilation hoods. See Table 1 Blower & Circuit Breaker
Ratings for recommended blowers. Contact Customer
Service for additional options.
CAUTION!
To reduce the risk of fire and electric shock, install this
range hood only with the blowers listed in Table 1.
WARNING!
Cutting the plug of the blower will void the warranty or
eligibility for return or exchange.
All hood models are rated for 120V AC installed with a
blower listed in Table 1, using a 15 amp dedicated circuit
breaker.
Blower selection will vary based on the volume of air that
needs moved and the length and location of the duct run.
For long duct runs with multiple turns and bends, consider
using a more powerful blower. For the most efficient air-
ow exhaust, use a straight run or as few elbows as
possible (refer to "Ductwork Preparation" on page 6).
Blower
**Circuit
Voltage
Current
Breaker
(AC)
(Amps)
(Amps)
120
4.2
120
5.7
120
8.5
120
4.2
120
5.7
120
5.4
Integral Blower Installation Only
1. The blower is attached to the hood using weld studs
provided on the mounting plate (see Figure 14).
2. Guide the motor mounting plate over the studs.
3. Attach (4) nuts (included with hood) to the weld studs.
Tighten nuts with a 3/8" (9 mm) nut driver to secure the
15
blower to the hood.
15
15
15
15
Transition
15
Hood Back
Plate
Wiring the Hood with an Integral Blower
Integral Blower model VTN1080 should be installed after
hood is mounted to the wall.
measurements in inches (mm)
Blower Housing
Figure 14: Integral Blower Motor Install
Figure 15: Integral Blower Model VTN1080
Hood Top
Plate
English 13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents