JUKI LBH-1790 Instruction Manual page 51

(2) Level 2
Press MODE switch for as long as three seconds and it is possible to edit.
NO.
Pedal selection
K01
Pedal type is set. / 3. How to use the pedal
2-pedal
(Without intermediate position)
Parameter setting change Permitted/Prohibited
K02
Prohibition of change of sewing data and memory switch data is
set.
Change
permitted
Function of prohibition of selection of kind of presser
K03
Permitted/Prohibited
Prohibition of change of U14 Kind of presser is set.
Change
permitted
Sewing shape selection level
K04
Number of sewing shapes which can be sewn can be increased.
(Max. 30 shapes)
12 shapes
Cloth cutting knife power
K05
Output power of cloth cutting knife is set.
0 : Min. power / 3 : Max. power
Selection of machine type
K06
Type of sewing machine head is set.
0 : Standard type 1 : Dry head type
Max. speed limitation speed setting
K07
Max. speed of sewing machine can be limited.
When K06 Selection of machine type is set to dry
head type, max. speed is automatically limited to 3,300
rpm.
Compensation of unsteady needle thread tension
K08
Output value of needle thread tension is wholly offset
and compensated.
Output time of needle thread tension changed value
K09
When data related to needle thread tension is changed, the
changed value is output as long as the set-up time.
Function of origin retrieval each time
K10
Origin retrieval is performed after completion of sewing or completion of
cycle.
Without
Needle up by reverse run Permitted/Prohibited
K11
When U01 Presser lifter maximum position is set to 14.0 mm or
more, motion of needle up by reverse run is automatically performed
and the machine stops. Prohibition of the motion can be set.
Needle up by
reverse run
prohibited
Knife solenoid lowering time setting
K12
Item
1-pedal 1-pedal
(With intermediate position)
Change
prohibited
Change
prohibited
20 shapes
Without
output
After end
of sewing
Needle up by
reverse run
permitted
Setting range
–
–
–
–
30 shapes
0 to 3
0 to 1
400 to 4200
-30 to 30
0 to 20
Output of set-
up time
–
After end
of cycle
–
25 to 100
46
Edit unit Initial value
– 2-pedal
– Change
permitted
– Change
permitted
– 12 shapes
1 1
1 0 (Standard type)
100rpm 3600 rpm
1 0
1s 0s
– Without
– Permitted
5ms 35