JUKI LBH-1790 Instruction Manual page 44

(2) Method of editing continuous stitching data
1) Set the mode to the input mode.
When the back-light of LCD display q shows the
input mode in blue color, it is possible to select
continuous stitching data. When the back-light
shows the sewing mode in green color, press
READY key w
mode.
2) Call continuous stitching data No. to edit.
Press PATTERN No. key u
selection screen, and pattern No. B which is
selected at present flashes on and off. Press ITEM
SELECTION key !0
have been registered are changed over and
displayed in order. Cycle data No. and continuous
stitching data No. which have been registered after
the last pattern No. are displayed. Here, select the
continuous stitching No. which you desire to sew.
3) Set continuous stitching data to editing status.
Press DATA key i
sewn first flashes on and off. In this state, it is possible to edit the data.
4) Select editing point.
Press ITEM SELECTION key !0
/ pattern No. / jump feed amount" and flashes on and off. When moving the editing point up to the last
data, additional indication pictograph
5) Change data of selected editing point.
Press DATA CHANGE key !1
When the editing point is at the pattern No. :
Pattern No. which has been registered is displayed and it is possible to select.
When the editing point is at the jump feed :
It is possible to edit numerical value within the range of ±120 mm. In addition, press RESET key e
and the pattern data of editing point can be deleted.
Repeat steps 4) and 5) to perform editing data.
* Input is completed by the steps above. For the continuous stitching, however, input all data
within the range of the presser size. Error message will be shown when the data exceeds the
range. Be sure to precisely input the presser size.
/ Refer to 4. Inputting presser type
to change over to the input
to call pattern
, and patterns which
, and continuous stitching data editing display C appears. Pattern No. D which is
, and editing point moves in order of "pattern No. / jump feed mount
is displayed.
, and data of editing point can be changed.
e
w
C
D
u i
39
q
!0
!1