JUKI LBH-1790 Instruction Manual page 22

No. NAME
q
LCD display Various data such as pattern No.,
shape, etc. are displayed.
w
READY key Press this key when starting sewing.
Every time this key is pressed, change-
over of sewing ready set state and data
set state can be performed.
e
RESET key Press this key when releasing error,
travelling the feed mechanism to its
initial position, counter resetting, etc.
r
MODE key Press this key when changing data of
the memory switches.
t
PRESSER key This key lifts or lowers the presser. When
the presser goes up, the needle bar travels
to the origin and when it comes down, the
needle bar travels to the right.
y
WINDER key This key is pressed when performing
bobbin winding.
u
PATTERN NO. key This key selects pattern No. display.
i
DATA key This key selects data display.
o
COUNTER key Thus key selects counter display.
!0
ITEM SELECTION This key selects pattern No., data No.,
key etc.
!1
DATA CHANGE This key changes various data.
key
!2
SHAPE key This key selects shape display.
!3
THREAD TENSION AT This key selects thread tension at
PARALLEL SECTION key parallel section display.
!4
THREAD TENSION AT This key selects thread tension at bar-
BAR-TACKING SECTION tacking section display.
key
!5
PITCH key This key selects pitch of parallel
section.
FUNCTION No.
!6
!7
!8
!9
@0
@1
@2
@3
@4
@5
@6
@7
@8
@9
#0
17
NAME
This key selects overedging width
OVEREDGING
display.
WIDTH key
BAR-TACKING This key selects left side of bar-tacking
width compensation display.
WIDTH, LEFT key
This key selects right side of bar-tacking
BAR-TACKING
width compensation display.
WIDTH, RIGHT
key
This key selects cloth cut length display.
C L O T H C U T
LENGTH key
CLEARANCE key This key selects clearance display.
This key selects knife groove width,
KNIFE GROOVE
WIDTH, RIGHT right compensation display.
key
This key selects knife groove width, left
KNIFE GROOVE
compensation display.
WIDTH, LEFT key
Press this key when copying pattern.
COPY key
This key selects presser type.
PRESSER
SELECTION key
This key makes the feed mechanism
FORWARD key
travel forward stitch by stitch.
This key makes the feed mechanism
BACKWARD key
travel backward stitch by stitch.
PATTERN This is a short cut key that pattern registration
is available. Registration of shortcut to setting
REGISTRATION key
display of an optional pattern is possible.
For the setting procedure, see P.36.
This is a short cut key that parameter registration
PARAMETER
is available. Registration of shortcut to setting
REGISTRATION key
display of an optional pattern, sewing
parameter or adjustment data is possible. For
the setting procedure, see P.37.
Speed increases when this is lifted
Speed variable
upward and decreases when this is
resister
lowered downward.
Light and shade of LCD display can be
LCDadjustment
adjusted.
variable rsistor
FUNCTION