JUKI LBH-1790 Instruction Manual page 13

(6) Connecting the safety switch connector
(7) Installing the hook oil shield plate
w
(8) Installing the operation panel
q
Cord clamp
Install hook oil shield plate q onto bed base e with
setscrew w.
q
e
Fix operation panel attaching plate q on the table
with woodscrew w and pass the cable through hole
q
e in the table.
w
e
8
1) Connect safety switch connector q
with connector w located on the
machine head side.
w
Fix the sewing machine so that it does
not come in contact with hook oil shield
plate q when raising/tilting the sewing
machine.