JUKI LBH-1790 Instruction Manual page 50

No.
Cloth cutting knife size
U18
Input knife size used.
Function of plural motions of cloth cutting knife
U19
Ineffective/effective
Function of thread breakage detection
U20
Ineffective/effective
Selection of presser position at the time of ON of
U21
READY key (Up/Down)
Presser foot position when READY key is pressed is set.
Selection of the position of presser foot at the time of
U22
the end of sewing (Up/Down)
This item sets the position of presser foot at the time of the end of
sewing. (Effective only at the time of 1-pedal settin
Presser up
Needle thread trimming motion start
U23
distance
Distance from the start of sewing to the start of needle
thread trimmer release motion is inputted.
Bobbin thread trimming motion start
U24
distance
Distance from the start of sewing to the start of bobbin
thread trimmer release motion is inputted.
Counter updating unit
U25
Unit to update sewing counter is set.
Total number of stitches Non-display/Display
U26
Non-display
Item
Ineffective Effective
Ineffective Effective
Presser down
Presser up
Presser down
Display
Setting range
3.0 to 32.0
–
–
–
–
0 to 15.0
0 to 15.0
1 to 30
–
45
Edit unit Initial value
0.1mm 32.0mm
– Ineffective
– Effective
– Presser Up
– Presser Up
0.1mm 1.0mm
0.1mm 1.5mm
1 1
– Non-display