BMW 5251 Service Manual page 75

110-3
Engine Removal and lnstallationl
Q
Fuel line plugs
(Tool No. BMW 13 5 281 / 13 5 282)
4
Fuel line removal tool
(Tool No. BMW 16 1 050)
CAUTION-
Disconnecting the battery may erase fault code@) storedin
memoiy Check for fault codes prior to disconnecting the
battery cables.
If the MIL (Malfunction Indicator Light, also may be
called "Check Engine" or "Service Engine Soon" light)
is illuminated, see OBD On-Board Diagnostics for
DME fault code information.
It orhersysrem faults have been detected, as indicated
I
by an ~llum~nated ABS, SRS orASC/DSC ~ a r n i n g light,
see the appropriate repair group in this manual or an
authorized BMW dealer for more information on fault
codes.
NOTE-
Engine removal procedures are similar for all 6-cylinder
models. When differences exist, they are noted at the be-
ginning of each step. Engine are referred to by engine
code. See 100 Engine-General for engine code and appli-
cation information.
@
Be sure to cover all painted surfaces before beginning the
removal procedure. As an aid to installation, label all com-
ponents, wires and hoses before removing them. Do not
reuse gaskets, O-rings or seals during reassembly.
The intake manifold must be removed on &cylinder mod-
els before the engine can be removed.
WARNING-
Due to risk of personal injury, be sure the engine is cold be-
fore beginning the removal procedure.