Cylinder Head Removal and Installation
/
-
<
Use a spanner tool to rotate exhaust sprocket until stop on in-
take sprocket is contacted.
-
Slide VANOS control unit forward to remove
Remove primary chain tensioner (arrow)
WARNING
-
Remove tensioner slowly
-
it is under spring pressure.
I
-
Working at the intake side of cylinder 1
:
Detach electrical harness connector for camshaft position
sensor and remove sensor.
Detach electrical harness connector for coolant tempera-
ture sensor.
-
Remove exhaust manifolds. D~scard nuts. See 180 Exhaust
System.
Disconnect heating system hoses (arrows) from back of cyl-
inder head.