BMW 5251 Service Manual page 331

Lubrication
system/
4
Install engine lifting tool at front of engine and raise engine
approximately 5 mm (114 in).
<
Remove pinch bolt (arrow) at steering column universal joint
near steering rack. See 320 Steering and Alignment.
-
Remove power steering pump, leaving hydraulic lines con-
nected to pump. Suspend pump using strong wire. See 320
Steering and Wheel Alignment.
NOTE-
For better access to power steering assembly, unbolt fluid
reservoir and suspend with wire.
Loosen upper nuts (arrow) in right and lefl engine mounts,
<
Remove right and left lower engine mount nuts (arrow)
-
On cars with automatic transmission, remove ATF cooler line
brackets from engine oil pan.
-
Disconnect electrical harness connector at oil level sensor on
oil pan.