HP ENVY 17 Maintenance And Service Manual page 84

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the top cover from the base enclosure (see
7. Remove the WLAN module (see
8. Remove the subwoofer (see
9. Remove the system board (see
Remove the memory module:
1. Turn the system board over.
2. Spread the retaining tabs (1) on each side of the memory module slot to release the
memory module. (The memory module tilts up.)
CAUTION:
the components on the memory module.
3. Slide the memory module forward (2) to remove it.
Reverse this procedure to install a memory module.
74 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
Optical drive on page
WLAN module on page
Subwoofer on page
System board on page
To prevent damage to the memory module, hold it by the edges only. Do not touch
42),
43).
Base enclosure on page
59).
63).
67).
46).