HP ENVY 17 Maintenance And Service Manual page 65

7. Loosen the edges of the back cover (1), (2), and (3) from all four sides of the display bezel and
lift the display panel (4).
NOTE: Use a sharp probe to pop the covers out to avoid scratching the bezel.
8. If you need to remove the panel, the display cable or the webcamera, follow these procedures.
To remove the raw panel, remove the six Phillips screws (1) and any adhesive that secures the
display panel to the back cover and lift the display panel (2) carefully.
NOTE: Depending on your specific model, some computers only have four display panel
screws.
Component replacement procedures 55