HP ENVY 17 Maintenance And Service Manual page 74

5. Remove the optical drive (see
6. Remove the base enclosure and top cover (see
Remove the subwoofer:
Disconnect the subwoofer cable (1) from the system board, remove the three Phillips screws (2),
▲
and then remove the subwoofer (3) by lifting it straight up.
NOTE:
the cables.
Reverse this procedure to install the subwoofer.
64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Optical drive on page
Carefully disconnect the cable by grasping the sides of the connector. Do not pull from
43).
Base enclosure on page 46).