HP ENVY 17 Maintenance And Service Manual page 68

b. Remove the display brackets by removing the eight Phillips and broadhead screws (1)
securing the hinge brackets to the back cover, and then lift the brackets (2) to remove
them.
c. Release the wireless antenna transceivers (1) from the display bezel. (The wireless
antenna transceivers are attached to the display bezel with double-sided tape.)
d. Remove the wireless antenna from the retaining channels (2), and lift the antenna (3).
Reverse this procedure to install the display panel.
58 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts