Monarch 9855 Quick Reference page 3

Hide thumbs Also See for Monarch 9855:

This Quick Reference contains supply loading and general care and

maintenance procedures. For more detailed information, refer to the

Operator's Handbook available on our Web site (www.monarch.com).

For information about creating formats or programming the printer, refer

to the Packet Reference Manual available on our Web site.

Review the printer safety information in the Regulatory Compliance

document provided with your printer.

Note:

Information in this document supercedes information in previous

versions. Check our Web site for the latest documentation and

release information.

C o n n e c t i n g t h e C a b l e s

The power supply automatically switches between 115V or 230V.

There are no operator settings required.

Plug the power cable into the socket. Plug the other end of the cable

into a grounded electrical outlet.

Connect the communication cable into the appropriate port. Secure

the cable with the connecting screws (serial) or spring clips (parallel).

If you are communicating with the host through the serial port, make

sure the printer's communication values match those at the host.

The factory default values are 9600 Baud, no parity, 8 bit data frame,

1 stop bit, and DTR flow control (9600, N, 8, 1, DTR).

Set the communication values on the printer to match

those at the host.

The printer also has a USB (Universal Serial Bus)

version 2.0 communications port, which is

compatible with version 1.1.

Drivers are available on our Web site

for a variety of operating systems.

Turn on the printer. Press ( I ) to turn on

and ( O ) to turn off the printer.

Parallel Port

USB Port

Serial Port

Pow er Cable Goes Here

9855