Monarch 9855 Quick Reference page 15

Problem
Serial bar codes do not
scan.
Backing paper is wrapped
around platen or peel roller.
Blank labels print or 750
series errors.
C o m m o n E r r o r s
Error Description/Action
002 Name must be 1 to 8 characters inside quotes.
005 Supply width is invalid.
018 Code page selection defined in the field is invalid.
025 Data length is too long.
101 Format referenced by batch not in memory.
259 Contrast adjustment must be within the range –699 to +699.
400 Invalid character following {.
403 Field separator was not found.
409 Printer memory is full. Delete unnecessary formats or graphics
from memory.
410 Parity mismatch.
411 Framing error (baud rate mismatch).
412 Flow control mismatch.
413 Online receive buffer is full. Check for a flow control problem.
611 Font, bar code, or density in the batch does not fit the format.
612 The data in this line of the batch is either missing or does not
match the format.
Action
Leave printhead unlatched when not in
use.
Use a print speed of 2.5 ips.
Adjust the print contrast.
Carefully remove the backing paper.
Make sure the backing paper tears at the
saw-toothed tear edge when using
backfeed and peel mode.
Clean supply sensors.
13