Installing The Virtual Media Key - IBM System x3550 M3 Type 4254 Installation And User Manual

Installing the virtual media key

Use this information to install the virtual media key.
About this task
To install the virtual media key, complete the following steps:
Procedure
1. Read the safety information that begins on "Safety" on page v and "Installation
2. Turn off the server and peripheral devices and disconnect the power cords.
3. Remove the cover (see "Removing the cover" on page 51).
4. Align the virtual media key with the mounting tab and slide it down the tab
Figure 57. Virtual media key installation
Results
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 106.
86
IBM System x3550 M3 Type 4254 and 7944: Installation and User's Guide
guidelines" on page 43.
onto the connector on the system board. Press the virtual media key down into
the connector until it is firmly seated on the system board.