Installation Guidelines - IBM System x3550 M3 Type 4254 Installation And User Manual

Figure 19. System-board optional device connectors

Installation guidelines

Use this information for installation.
Attention: Static electricity that is released to internal server components when
the server is powered-on might cause the system to halt, which might result in the
loss of data. To avoid this potential problem, always use an electrostatic-discharge
wrist strap or other grounding system when removing or installing a hot-swap
device.
Before you install optional devices, read the following information:
v Read the safety information in "Safety" on page v, the guidelines in "Working
v Make sure that the devices that you are installing are supported. For a list of
v When you install your new server, take the opportunity to download and apply
inside the server with the power on" on page 45, and "Handling static-sensitive
devices" on page 46. This information will help you work safely.
supported optional devices for the server, see http://www.ibm.com/systems/
info/x86servers/serverproven/compat/us/.
the most recent firmware updates. This step will help to ensure that any known
issues are addressed and that your server is ready to function at maximum
levels of performance. To download firmware updates for your server, go to
http://www.ibm.com/support/fixcentral/.
Chapter 2. Installing optional devices
43