STACKED ISO UNITS PROVISION
*
Note: Refer also to the instructions included with the aftermarket radio.
1
Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure A)
2
Slide the stacked ISO units into the
Double DIN bracket/radio housing
assembly and secure the units to the
kit using the screws supplied with the
units. (Figure B)
3
Snap the Double DIN trim-plate onto
the front of the housing/radio assem-
bly. (Figure B)
Continue to final assembly.
95-3527 KIT ASSEMBL Y
3
A
B