Metra Electronics 95-3105 Installation Instructions

Saturn 1995-99 all models

Download this manual

INSTALLATION INSTRUCTIONS FOR PART 95-3105

95-3105

KIT FEATURES

• DDIN Head Unit Provision

• ISO Stacked Head Unit Provision

KIT COMPONENTS

A) DDIN Brackets

B) DDIN Trim Plate

• Phillips Screwdriver • Panel Removal Tool • Socket Wrench

APPLICATIONS

SATURN

1995-99 ALL MODELS

TOOLS REQUIRED:

WIRING AND ANTENNA CONNECTIONS (Sold Separately)

HARNESS:

• 70-1858 - GM Harness 1988-2005

ANTENNA ADAPTER:

• 40-GM10 - GM Antenna Adapter 1998-up

Page 1 INSTALLATION INSTRUCTIONS FOR PART 95-3105 APPLICATIONS SATURN 1995-99 ALL MODELS 95-3105 KIT FEATURES • DDIN Head Unit Provision • ISO Stacked Head Unit Provision KIT COMPONENTS A) DDIN Brackets B) DDIN Trim Plate WIRING AND ANTENNA CONNECTIONS (Sold Separately) HARNESS: •...
Page 2: Dash Disassembly
95-3105 DASH DISASSEMBLY SATURN (ALL MODELS) 1995-99 Disconnect the negative battery terminal to prevent an accidental short circuit. Remove (2) pop-clips from the sides of the radio trim bezel. (Figure A) Unclip the radio trim bezel, discon- nect the switch wiring and remove the bezel.
Page 3: Kit Assembly
95-3105 KIT ASSEMBLY DOUBLE DIN / STACKED ISO DIN HEAD UNIT PROVISION Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.