Download Print this page

Metra Electronics 95-3528 Installation Instructions Manual

Pontiac 2004 gto; pontiac 2005 gto; pontiac 2006 gto

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS FOR PART 95-3528
95-3528
KIT FEATURES
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
KIT COMPONENTS
A) Double DIN Brackets • B) Double DIN Trim plate
A
Small Flat Blade Screwdriver • Panel Removal Tool
1-800-221-0932
© COPYRIGHT 2008 METRA ELECTRONICS CORPORATION
APPLICATIONS
PONTIAC GTO
2004-2006
TOOLS REQUIRED:
• 86-3528 Radio Removal Keys
B
www.metraonline.com

Advertisement

loading

Summary of Contents for Metra Electronics 95-3528

  • Page 1 INSTALLATION INSTRUCTIONS FOR PART 95-3528 PONTIAC GTO 2004-2006 95-3528 KIT FEATURES • Double DIN Radio Provision • Stacked ISO Mount Units Provision KIT COMPONENTS A) Double DIN Brackets • B) Double DIN Trim plate Small Flat Blade Screwdriver • Panel Removal Tool •...
  • Page 2 - Pontiac GTO 2004-2006 ........
  • Page 3: Pontiac Gto 2004-2006

    Remove (1) Phillips screw from inside lower open storage area where center console and dash meet. (Figure C) 5 Unsnap and remove center console (open center armrest/ storage com- partment and work forward). (Figure D) Continue on page 2. 95-3528 DASH DISASSEMBL Y...
  • Page 4 A/C controls. Remove (3) Phillips screws holding "cage" in radio opening. (Figure F) Pull down on the "cage" from the opening inside on the top and remove. (Figure G) Continue to final assembly. 95-3528 DASH DISASSEMBL Y...
  • Page 5: Double Din Radio Provision

    95-3528 KIT ASSEMBL Y DOUBLE DIN RADIO PROVISION Note: Refer also to the instructions included with the aftermarket radio. Attach the Double DIN brackets to the Double DIN radio unit using the screws supplied with the radio. (Figure A) Continue to final assembly.
  • Page 6: Stacked Iso Mount Units Provision

    95-3528 KIT ASSEMBL Y STACKED ISO MOUNT UNITS PROVISION Note: Refer also to the instructions included with the aftermarket radio. Attach the Double DIN brackets to the stacked ISO mount units using the screws supplied with the units. (Figure A)
  • Page 7: Final Assembly

    *NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications. 95-3528 FINAL ASSEMBL Y (A) Strip wire ends back 1/2" B) Twist ends together...
  • Page 8 95-3528 INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV. 05/07/08 © COPYRIGHT 2008 METRA ELECTRONICS CORPORATION INST95-3528...