SATA Cables Installation Procedures
Install Backplane Board
1. Align the holes on the bottom of the backplane board with the protruding blue pegs on the floor
of the chassis.
2. Push down to snap the backplane board into place. See letter "A" in Figure 15.
3. Use a Number 1 size Phillips screwdriver to install the four screws into the steel lip and the
backplane board. See letter "B" in Figure 15.
4. Use a Number 1 size Phillips screwdriver to install two screws into each side of the system and
the backplane board. See letter "C" in Figure 15.
®
Intel
Storage System SSR316MJ2 Cable Kit
Figure 15. Installing New Backplane Board
TP01807
24