Connect I C Cables; Figure 13. Connecting I - Intel SSR316MJ2 Installation Manual

SATA Cables Installation Procedures
2
Connect I C Cables
NOTE
2
The I C cables are labeled at each end, on the cable connector. In the
instructions and the figure below, it is assumed that letter "A" corresponds to
your cable labeled JP4 and SL3_J13. Your connections may be different.
Refer to the notes you made when you disconnected the cables to ensure you
are reconnecting them in the correct places.
2
1. Connect the I C cable that is labeled JP4 to the backplane board. See letter "A" in the circled
area of Figure 13.
2
2. Connect the I C cable that is labeled JP6 to the backplane board. See letter "B" in the circled
area of Figure 13.
®
Intel Storage System SSR316MJ2 Cable Kit
A
B
B
A

Figure 13. Connecting I

TP01822
2
C Cables
22