Interlogix Caddx User Manual page 3

This manual is furnished to help you understand your security system and
become proficient in its operation. All users of your security system should read
and follow the instructions and precautions in this booklet and, if possible,
practice on the keypad control while your professional installer is on site.
Failure to do so could result in the security system not working properly. This
booklet should be kept in an accessible location for the life of the security
system. If you do not understand any part of this manual you should notify your
installing company shown on page 1.
The SECURITY CONTROL can be turned on (ARMED) and off (DISARMED) by
entering a 4 or 6 digit code into the Keypad Control, which is similar to a telephone
keypad. If your Security Control has been so programmed, you may be able to turn on
(ARM) your System by simply double pressing the [AWAY], [STAY] or [NIGHT] key.
The system must always be disarmed using a 4 or 6 digit code. The LED keypad
includes up to 18 lights and a built-in electronic sounder. These provide specific
information relating to the status of the security system, which is described in the
booklet. Understanding what the lights and sounds mean will help you to easily operate
your system.
Keep in mind, the level of security you will obtain with this system relates
specifically with two major factors:
1. The quantity, quality and placement of security devices attached to this
system.
2. The knowledge you have of the security system and how that knowledge is
utilized in a weekly test of the complete system.
You should be aware of the following facts when preparing a safety/security plan
for your home/business.
•
Your security system is an electronic device and is subject to failure or
malfunction. Do not rely on it as your single source of security.
•
Your system should be tested weekly.
•
Your system will not work without power.
•
Warning devices will need to be loud enough, wired correctly, and properly
placed to provide notification of an alarm event.
•
Smoke and heat detectors may not detect heat and smoke in all situations.
•
Use qualified security professionals to install and maintain your security system.
•
It may be possible to arm the security system without the backup battery
connected. Your periodic test should be done with AC Power removed to verify
the battery is connected and adequately charged.
•
Care should be taken to plug in and restrain the AC Transformer after testing.
Please read the following information and instructions carefully before operating
your security control system.

LED Keypad