Emap Setup Options - Garmin eMap Owner's Manual

Reference
eMap Setup
'General' Settings File
Operating Mode Options
Backlight Timeout Options
Beeper Options
Units of Measure Options
26
Setup provides three tabbed pages to allow you to
choose from various system setup options for 'General',
'Time' and 'Interface' settings. If you choose not to change
a setting, it will remain at the factory set 'Default'.
'General' Settings Page:
The 'General' Settings Page allows you to choose
between three operating modes, 'Normal' with the GPS
receiver operating, 'Battery Saver' with a less frequent
satellite signal updating process to save on battery power,
and 'GPS Off' which allows you to operate the eMap with
GPS receiver turned off to also save on battery power. The
'Use Indoors' option on the Map Page options menu
functions the same as the 'GPS Off' mode.
The backlighting timeout delay can be set to stay on
or to turn off automatically 15 seconds, 30 seconds, 1 or
2 minutes after the last time you have pressed a keypad
key. When using the external power (cigarette lighter)
adapter, the backlight does not timeout.
The audible 'Beeper' setting can be programmed to
sound whenever a key is pressed or an on-screen message
appears, only when a message appears, or off altogether.
The units of measure can be set to Statute, Metric, or
Nautical.
To program the 'General' Settings Page:
1. Highlight the field you want to program using the
ROCKER keypad and press the ENTER key to pop-
up the options window.
2. Highlight the desired option using the ROCKER
keypad and then press the ENTER key to confirm.