Mapsource Info - Garmin eMap Owner's Manual

The MapSource Information Page
The MapSource Information Page shows you
information about detailed map data contained on the
optional map cartridge you can install in your eMap unit.
This page displays the map set name of the
MapSource map data on the map cartridge. The name of
the maps installed on the cartridge will be displayed in the
center field along with a check box. The lower field
displays complete information about the highlighted map.
If the check box for a map is checked, that map will
be shown on the map pages. If the box is not checked the
map will not be shown on the map pages. You cannot
view multiple types of MapSource data at the same time.
When you leave a MetroGuide area for instance and
enter a MapSource topographic map, the display will
change to contour lines. The same is true when moving
from a topo map to a MetroGuide Map. The MetroGuide
maps are at the top of the hierarchy and will replace any
other map information. Here is the list of hierarchy for
your reference beginning with those titles that take
precendence:
1. MetroGuides
3. US Topographic
When the Map Page is displaying MapSource data the
word "MapSource" will appear below the map scale bar in
the lower left corner of the page.
The System Information Page
The System Information Page tells you the version of
operating software installed in your eMap unit. You may
need to refer to this page only when service to the unit is
required.
2. US Road and Recreation
4. World Map
Reference

MapSource Info

MapSource Info Page
System Info
System Info Page
25