C. Use Wireless Remote or Stereo to Operate iPod
Button
Press
Press
& Hold
Press
x 2
Press
x 3
Press
4
22.10 Generic MP3 Player Operation
A. Connecting Your MP3 Player
1. Plug in any MP3 Player's headphone
output jack with supplied cable into the
auxillary port as shown using the sup-
plied audio RCA cable (iPod shown for
demonstration purposes only).
B. Setting Up The MP3 Player for Use
1. Select preferred song/album/playlist prior plugging in MP3 Player
and start playback.
2. Press "Source Button"
play reads "AU-1".
Important Note: All external MP3 Playback operations are per-
formed solely by the MP3 Player with the exception of volume
control and "Source Button" selector, which can be controlled via
wireless remote or on the stereo receiver.
WARNING: Electrical Shock Hazard Exists!
Never install, handle or remove MP3 Player while hands are
wet or while sitting partially or fully immersed.
Operation
Next Track
Fast Forward
Return to Beginning of Current Track
Recall Previous Tracks
Pause (Press Again to resume Play)
on stereo receiver or remote until the dis-
Page 81