B. Setting Up The iPod for Use
1. Select and play preferred song/album/playlist prior to docking iPod.
2. Press "Source Button"
play reads "CD-1".
C. Use Wireless Remote or Stereo to Operate iPod
Button
Press
Press
& Hold
Press
x 2
Press
x 3
Press
4
23.10 Generic MP3 Player Operation
A. Connecting Your MP3 Player
1. Plug in any MP3 player's headphone
output jack with supplied cable into the
auxiliary port as shown using the sup-
plied audio RCA cable (iPod shown for
demonstration purposes only).
B. Setting Up The MP3 Player for Use
1. Select preferred song/album/playlist prior plugging in MP3 player and
start playback.
2. Press "Source Button"
play reads "AU-1".
Note: All external MP3 player playback operations are performed
solely by the MP3 Player with the exception of volume control
and "Source Button" selector, which can be controlled via wire-
less remote or on the stereo receiver.
WARNING: Electrical Shock Hazard Exists!
Never install, handle or remove MP3 player while hands
are wet or while sitting partially or fully immersed.
on stereo receiver or remote until the dis-
Operation
Next Track
Fast Forward
Return to Beginning of Current Track
Recall Previous Tracks
Pause (Press Again to resume Play)
on stereo receiver or remote until the dis-