Pillow Care; Maintaining The Synthetic Cabinet; Maintaining The Cover - Sundance Spas Altamar Owner's Manual

13.4 Pillow Care

Remove and clean the headrest pillows as needed with soapy water us-
ing a cloth or soft-bristle brush. To maintain water resistance and luster,
apply a quality vinyl conditioner once a month.
IMPORTANT: Never attempt to remove the pillows by
pulling on them! The pillows utilize a bolt-on design that
prohibits removal without tools.
To remove pillows:
1. Grasp center pillow insert (A)
with finger tips and gently pry
outward from pillow base (C).
2. Use a standard screwdriver to loosen
and remove mounting bolts (B) from
pillow base.
3. Assemble in reverse order after
cleaning. DO NOT overtighten pillow
mounting bolts!

13.5 Maintaining The Synthetic Cabinet

The synthetic cabinet requires little or no maintenance of any kind. To
clean, simply wipe cabinet with a clean towel and mild detergent soap
solution.
CAUTION: Never spray cabinet with a high pressure
garden hose for any reason since this action may induce
an electrical short in the hot tub's electrical equipment.

13.6 Maintaining The Cover

Using the Sundance insulating hot tub cover anytime the hot tub is not
in use will significantly reduce your operating costs, heat-up time, and
maintenance requirements. To prolong the life of the cover, handle it with
care and clean it regularly using mild soap and water. Periodic treat-
ments with a special conditioner developed for Sundance hot tub covers
will help protect against deterioration caused by U.V. rays from the sun.
Never allow anyone to stand or sit on the cover, and avoid dragging it
across rough surfaces.
Page 57