Changing Gateway Goback's Storage Capacity And Location - Gateway 3350 User Manual

Changing Gateway GoBack's storage capacity
and location
If you want to adjust the amount of space allocated to Gateway GoBack
history storage or change the location where Gateway GoBack stores this
information, you need to uninstall and reinstall Gateway GoBack.
Caution
During installation, you will need to set aside part of your hard drive so that
Gateway GoBack can store data. If you select
Gateway GoBack, you set aside approximately 10 percent of your hard drive
for Gateway GoBack to use.
Approximately one week's data can be stored with this setting. However, the
amount of drive information that Gateway GoBack can store depends on how
much you use the computer, so you may need to set aside a larger part of
your hard drive for storage.
To uninstall and reinstall Gateway GoBack:
1
Click
Start
2
Click/Double-click the
Programs dialog box opens.
3
Select
GoBack
4
Follow the on-screen instructions. Gateway GoBack restarts your
computer.
5
After your computer has restarted, place Disc 3 of the System Restoration
Kit into your CD/DVD drive. The System Restoration program starts.
- OR -
If the program does not start automatically, click
In the Run dialog box type D:\RUNMENU.EXE (where D is the drive
letter of your CD/DVD drive), then click
program starts.
When you uninstall Gateway GoBack, all of the information
about your computer that Gateway GoBack tracked is
discarded. You will only be able to revert your hard drive
or retrieve files from the information that Gateway GoBack
creates after it is reinstalled again.
, then select
Settings
Add/Remove Programs
from the list, then click
Easy Install
, then
Control Panel
icon. The Add/Remove
Add/Remove
. The System Restoration
OK
Using Gateway GoBack
when you install
.
.
, then select
Start Run.
199