Connecting To The Port Replicator - Gateway 3350 User Manual

Connecting to the port replicator

You can attach your notebook to the port replicator while your notebook is
off, on, or in Standby/Suspend mode.
To attach your notebook to the port replicator:
1
Connect external devices to the ports on the port replicator.
2
Close the notebook's LCD panel, then gently press the back of the
notebook down onto the replicator until it locks into place.
If you have difficulty attaching the notebook to the replicator, remove
the notebook and look for anything that might be interfering with the
connection, then try again.
3
Open the LCD panel and resume your work.
Important
150
Using the Port Replicator
The notebook may detect additional devices and add
drivers after being attached to the port replicator. This
process must be completed for components to work
properly. Follow any on-screen instructions, if necessary.