Recharging The Battery; Changing The Battery; Replacing The Battery - Gateway E-100M Technical Reference Manual

Recharging the battery

The battery recharges while it is installed and your notebook
is connected to AC power. While the battery recharges, the
battery charge indicator turns on.

Changing the battery

Replacing the battery

Replace only with a battery specifically manufactured for your MPC notebook.
Discard used batteries according to local hazardous material regulations.
The battery used in this device may present a fire or chemical burn hazard if
mishandled. Do not disassemble, heat above 212°F (100°C), or incinerate.
Dispose of used batteries promptly. Keep away from children.
while the notebook is turned on. If your notebook is not plugged into an AC
outlet, you must turn the notebook off while changing the battery.
To replace the battery:
1
2
3
40
CHAPTER 5: Managing Power
Warning
Danger of explosion if battery is incorrectly replaced.
Caution
If your notebook is connected to AC power, you can change the battery
Disconnect your notebook from the optional port
replicator.
If your notebook is on and is connected to AC power, go
to Step 3.
-OR-
If your notebook is on and is not plugged into an AC
outlet, save your work and turn off the notebook.
Turn your notebook over so the bottom is facing up.