Memory; Modem - Gateway 3350 User Manual

Memory

You receive a "Memory error" message
Make sure the memory modules are inserted correctly in the memory bay
slot. For more information, see "Replacing the memory" on page 142.
Use diagnostic programs to help determine if a memory module is failing.
You receive a "Not enough memory" error message
Close all programs, then restart the computer.

Modem

Your modem does not dial or does not connect
Make sure your computer is connected to the telephone line and the
telephone line has a dial tone. See "Connecting the modem" on page 25
to make sure that the connections have been made correctly.
Make sure that the modem cable is less than 6 feet (1.8 meters) long.
Remove any line splitters or surge protectors from your telephone line,
then check for a dial tone by plugging a working telephone into the
telephone wall jack.
If you have additional telephone services such as call waiting, call
messaging, or voice mail, make sure that all messages are cleared and call
waiting is disabled before using the modem. Contact your telephone
service to get the correct code to temporarily disable the service. Also
make sure the modem dialing properties are set appropriately.
To check the dialing properties:
1
Click
window opens.
2
If you do not see the
3
Double-click the
Dialing Properties window opens.
4
Make sure all settings are correct.
, then select
Start Settings
Modems
Modems
, then
Control Panel
icon, click
view all control panel options
icon, then click
Dialing Properties
Troubleshooting
. The Control Panel
. The
239
.