Preparing Cabinet For Fitting Of Oven - John Lewis JLBIDO911 Instruction Manual

• By connecting the appliance to a cooker
point (having a double pole isolating switch
with at least 3mm contact separation in all
poles) and protected with a fuse or
miniature circuit breaker at your mains fuse
box.
• If you wish to connect an oven and a hob
to a cooker point you can. Oven and hob
units should be separately connected to a
cooker point.
Cooker point
Oven
Important! It is good practice to
• Fit an Earth Leakage Circuit Breaker to your
house wiring.
• Wire your appliance to the latest IEE
regulations.
Hob
42
Preparing cabinet for
fitting of oven
• Make sure that the cabinet is the correct
size for the appliance to be fitted.
• If the size is between 565-570mm, then the
cabinet should be modified so that at the
screw fixing points the recommended
dimension of at least 560-565mm is
maintained. The modification should ideally
be localised to ensure that after screw
fitment the oven is securely fixed into
position.
• The cabinet must be stable and level by
firmly securing it to the wall or floor. If
necessary, make arrangements to ensure
the shelf upon which the oven will rest is
level.
• When the appliance is installed ensure a
minimum gap of 2mm is maintained
between the trim on the bottom edge of
the appliance, and any corresponding
door / panel underneath.