How To Finish Unpacking; To Remove Cover Of Mains Terminal; Connecting To The Mains Terminal - John Lewis JLBIDO911 Instruction Manual

How to finish unpacking

• Place packed appliance next to the space in
which it will be installed.
• Remove the appliance packing except for
bottom tray, which should be left in
position until the appliance is ready to be
fitted into its cabinet.
Important! It is imperative that the
appliance is left in the base to protect both the
appliance and the floor.
• Ensure the user is given these operating
instructions.
Warning! Important : Switch off at
the mains, miniature circuit breaker
and if appropriate, remove fuse before
commencing any electrical work.
To remove cover of
mains terminal
• From the rear of the appliance, remove
mains input terminal cover to gain access to
terminal block.
• First remove retaining screw with pozidrive
screwdriver.
• Prise cover loose using screwdriver in
position (1) then lever off with screwdriver
in position (2) at either side.
• Lift cover and remove screw from cable
clamp.
Connecting to the mains
terminal
Warning! Warning: This appliance
must be earthed.
• We recommend you use a new length of
2
6mm twin core and earthed cable to
ensure your safety.
• Make connection as shown by proceeding
as follows :-
44
Hook clamp
under here
Cable
clamp