Audio Settings - Gigaset AT-510 User Manual

AT-510 IP phone user manual
with the 6 as the first number will be refused
Limit List: outgoing calls with these phone numbers will be refused
You add a certain number in it , when the number you dial contain this number , it will be
refused
Use x to represent any number. For example , 4xx means any outgoing call with 3 digital
and the first number of 4 , will be refused
Any digital call with a certain head number , For example 6. means any outgoing call
number with the 6 as the first number will be refused
Attention：black list and limit list max record is 10 pieces for each
4.4、 Audio Settings
First Codec：choose the codec in first priority , available choice are G.711A/u, G.729
Second Codec：choose the codec in second priority
Third Codec：choose the codec in third priority
VAD：voice active detection. If enabled ，G.729 payload length can not be set over 20ms
Handdown Time： Flashhook response time , minimum 200ms as default. if the flashhook was
pushed down for less than 200ms , this action will take no effect.
Input Volume：handset speaker voice volume
Output Volume：handset MIC volume
Handfree Volume：handfree speaker output volume
Ring Volume：ring tone volume
G729 Payload Length：config G729 Payload length
17 / 31