Rear Panel - Hand Held Products Dolphin 9500 User Manual

Battery Capacity Indicator LEDs
These LEDs give a readout of the remaining battery capacity after it has run through a complete analyze cycle. For more
information, see
Analyze Button
Press this button to start a battery analyze cycle. For more information, see
Status LEDs
A status LED is located above each of the four battery slots. The color of the LED indicates the charge status of the
batteries in its slot.
Status LED color
Green
Orange
Red

Rear Panel

Power Switch
Toggle the power switch to turn the QuadCharger on and off.
Power Supply Connector
Use this connector to attach the power supply to the QuadCharger. The universal power supply accepts input voltages
between 90-265 volts.
15 - 2
Battery Capacity Indicator LEDs
This color indicates that the battery in the slot...
Has completed its charge cycle and is ready for use.
Is being charged at a maximum charge rate.
Encountered an error during the most recent charge cycle.
Status LED
on page 15-2.
Power Switch Power Supply Connector
Dolphin® 9500 Series Mobile Computer User's Guide
Using the Battery Analyzer on page 15-4.