Hand Held Products Dolphin 9500 User Manual page 123

To Create a New Profile
In the Preferred Profiles section, tap the New button
Authentication.
Network Profile Tab
Field Description
Network Name &Type Section
SSID Enter an SSID, which is the Network Name. Check with your network administrator for Network
Name (SSID).
Choose the transmit rate from the drop-down list - 1MB, 2 MB, Auto 1/2 MB, 5.5 MB, 11 MB, or Fully
TX Rate
Auto. The transmit rate is set to Fully Auto by default.
From the drop-down list, select
Type
Peer-to-Peer – This mode used for communication between two (or more) radio stations (cards)
without an access point.
Access Point (AP) – This mode is also called "Infrastructure" mode.
Scroll to select a channel for communication.
Chan
Select Low Density (default), Medium Density, or High Density from the drop-down list and tap OK.
AP Search
Threshold
AP search thresholds are used for wireless client roaming between APs. In general, the higher the
density selected here, the easier your WLAN card roams between APs with the same SSID in the
same network. Roaming also depends on the relative signal strength of the AP.
OK Tap this button to save the profile or changes to the profile.
Tap this button to close the window without saving or modifying the profile.
Cancel
Note: The SSID, Type, TX Rate, and Channel fields are unchangeable in Access Point mode, whereas TX Rate and Channel
fields can be changed in Peer-to-Peer mode.
Dolphin® 9500 Series Mobile Computer User's Guide
. A screen opens with two tabs windows: Network Profile and
7 - 7