Uphone Configuration; Accessing; Requirements - Hand Held Products Dolphin 9500 User Manual

uPhone Configuration

uPhone Settings enable you to establish the normal operating parameters for uPhone applications.

Accessing

You can access uPhone Settings two ways:
1. Go to Start > Settings > System tab > uPhone icon .
2. In the Dialler application, selecting Tools > Configuration.

Requirements

Because this control panel adjusts network settings, the GSM radio must be powered up, and a SIM must be installed for it to
open correctly. If not, you will receive a notification message when you try to open the control panel.
If the radio is powered up and a SIM installed, an animated wait icon displays the following message while the system accesses
the network: "Settings on the Network are being accessed. Please wait..."
If there is no response from the network within 60 seconds, this message times-out and the control panel closes. Otherwise, the
uPhone Settings screen displays; the General tab appears first by default.
Dolphin® 9500 Series Mobile Computer User's Guide 9 - 21