Hand Held Products Dolphin 9500 User Manual page 145

Field
Password
Protocol
System Tab
The System Settings tab controls logging and the port manger timeout period.
Field
Log Level
Defaults
Dolphin® 9500 Series Mobile Computer User's Guide
Description
The password used for the tunneled authentication protocol specified. It may contain up to 63
ASCII characters and is case-sensitive. Asterisks appear instead of characters for enhanced
security.
This parameter specifies the authentication protocol operating within the secure tunnel.
The following protocols are currently supported for TTLS: EAP-MD5, CHAP, PAP, MS-CHAP
and MS-CHAP-V2.
The following protocols are currently supported for PEAP: EAP-MS-CHAP-V2, TLS/Smartcard,
and Generic Token Card (EAP-GTC).
Description
These settings control the detail of the log messages generated by the Client. Each level is
cumulative. By default, all errors, warnings, and information events are logged. Each entry
records a severity code (of one [debug message] to four [error] asterisks), a time stamp, and a
message.
Errors - only the most severe conditions are logged.
Warnings - less severe conditions are logged.
Information - all errors, warnings, and information events are logged. This is the default setting.
Debugging - creates a log message each time the Client detects or reacts to an event. Be
advised that log entries fill memory quickly if the Debugging level is chosen. Do not use the
Debugging option for a significant length of time because most internal operations generate
messages.
Tap this button to return log settings to the default settings.
7 - 29