Hand Held Products Dolphin 9500 User Manual page 159

Advice and Workarounds
Issue
I made changes, but they do not appear to
have taken effect.
How do I enable peer-to-peer (ad-hoc) mode
to have two clients communicate without an
access point?
Dolphin® 9500 Series Mobile Computer User's Guide
Possible Causes and Solutions
Always tap OK before exiting a screen you have changed. Then restart
the Client from the Client menu on the main screen.
• On the Wireless Networks tab, add a new profile to the Configured
Network list.
• On the Profile Info tab, give each side the same network name (SSID).
• Select Peer-to-Peer Group (ad hoc mode) and Do active scan.
• On the WEP management section, select Use key for data encryption
and enter an identical key for both clients.
• Verify that this network profile is the first (or only) one in the
Configured Network list and try to restart both clients at roughly the
same time.
7 - 43