Hand Held Products Dolphin 9500 User Manual page 149

Wireless Networks Tab
Field
Available Networks Section
This section displays the networks the terminal recognizes as available to connect to. When the Client is first installed, there
are no entries in the Available Networks list.
Scan
Move to Configured
Configured Networks section
This section displays the networks your terminal is connected to. This section enables you to add or remove networks as
well as review and edit the properties of existing configured networks.
Default
Up
Down
Dolphin® 9500 Series Mobile Computer User's Guide
Description
Tap this button to see a list of networks broadcasting their availability.
Note: You can also attach to networks who are not broadcasting.
This button activates only after Scan has been tapped and available networks have been
retrieved.
In the list of networks retrieved, select the network you wish to connect to, and tap Move to
Configured. This selects the network, which now appears in the Configured Networks section.
When the Client is first installed, there is a Configured Network named "default" in the list. This
profile has Associate with any network selected in its Properties selection screen.
If you are going to be in a location with only one access point (or more than one access point
that attaches to the same network), the default profile may be sufficient for you needs, without
necessitating the selection of a specific network or networks.
If default is last in the list, it can act as a wildcard should you be out of the range of your primary
networks (which are listed first). Do not place default at the top or middle of the list because, if
it is, connection to the other list entries will never be attempted.
Tapping this button moves a selected network up one place in the list.
Tapping this button moves a selected network down one place in the list.
Note: The order of the networks in this list is the exact order that connections will be attempted.
The network listed first will be attempted first and so on. Place your primary networks first.
7 - 33