TRENDnet TW100-S4W1CA User Manual page 17

fees charged by your ISP (default time=0, always connect). Check the
Connect-on-demand box to enable your router to connect your ISP
whenever an Internet connection is required.
2-2-4 PPTP
If connecting to the Internet
using a (PPTP) xDSL
Modem, enter the PPTP
Account Name, PPTP
Password, Host Name,
Service IP Address, your IP
Address, and your Subnet
Mask as provided by your
ISP in the appropriate fields.
If your ISP has provided
you with a Connection ID,
enter it in the Connection ID field. Otherwise, leave it as is.
The MTU feature specifies the
largest packet size permitted for
network transmission. Enter the
value desired; for most DSL
users, 1492 is recommended. By
default, MTU is set at 1492.
The Maximum Idle Time feature
can control the connection time
if you want to reduce connection
fees charged by your ISP
(default time=0, always connect).
Check the Connect-on-demand box to enable your router to connect your
ISP whenever an Internet connection is required.
29
2-2-5 DNS
The Domain Name System (DNS) is the way that Internet domain names
are located and translated into Internet Protocol (IP) addresses.
If your ISP provided at least one DNS Server IP Address, type that IP
Address in the Primary DNS address fields. You may also enter another
DNS Server IP Address; the Router will utilize these simultaneously for
quicker access to functioning DNS Servers.
2-3 LAN
To set the LAN's IP Address and DHCP Service.
2-3-1 LAN Settings
The default value is
192.168.1.1 for the IP
address and 255.255.255.0
for the Subnet Mask. You
may also change the value
according to your needs.
To enable the DHCP server to allocate dynamic IP addresses to the clients
PCs, click "Enable". The client can get the IP Addresses from a range
from IP Pool Starting Address to IP Pool Ending Address. You may also
change the IP Pool range value.
The Lease Time is the amount of time a network user will be allowed to
connect to the Router with his/her current dynamic IP address. Enter the
amount of time, in hours, days or weeks, which the user will be "leased"
this dynamic IP address.
You can enter your local domain name in the Local Domain Name fields.
30