TRENDnet TW100-S4W1CA User Manual page 15

2-1-3 Firmware Upgrade
Upgrading firmware for this Broadband Router improves functionality
and performance. Enter the path and name of the upgrade file then click
the APPLY button below. You will be prompted to confirm the upgrade.
While updating the firmware, please wait after pressing the APPLY
button, and follow the instructions on the screen; the System Light on the
front panel will start blinking when the firmware has been upgraded
successfully.
2-1-4 Configuration Tools
Use the "Backup Settings" tool to save the Broadband Router's current
configuration to a file named "config.bin" on your PC. You can then use
the "Restore Settings" tool to restore the saved configuration of the
Broadband Router that you set before. Alternately, you can use the
"Restore to Factory Defaults" tool to force the Broadband Router to reset
and restore the original factory settings.
25
Restore Factory Default
To restore the factory default settings of the Broadband Router,
click the "Restore" button.
Backup Settings
Click the "Backup Settings" button to save the current settings in a
file called "config.bin," or save to a filename of your choosing.
Restore Settings
To restore the backup file to the Broadband Router, enter the path
and filename on the restore settings.
2-1-5 Status
Use the Status screen to view the connection status for the Broadband
Routers' WAN/LAN interfaces, firmware and hardware version numbers,
and the number of connected clients to the network.
2-1-6 System Log
View any attempts that have been made to gain access to the network.
26