TRENDnet TW100-S4W1CA User Manual page 13

1-2-4 PPTP
If connecting to the Internet
using a (PPTP) xDSL Modem,
enter the PPTP Account Name,
PPTP Password, Host Name,
Service IP Address, your IP
Address, and your Subnet Mask
as provided by your ISP in the
appropriate fields. If your ISP
has provided you with
Connection ID, enter it in the
Connection ID field. Otherwise, leave it as is.
The MTU feature specifies the
largest packet size permitted for
network transmission. Enter the
value desired; for most DSL
users, 1492 is recommended. By
default, MTU is set at 1492.
The Maximum Idle Time feature
can control the connection time
if you want to reduce connection
fees charged by your ISP
(default time=0, always connect).
Check the Connect-on-demand box to enable your router to connect your
ISP whenever an Internet connection is required.
a
21
1-3 DNS
The Domain Name System (DNS) is the way that Internet domain names
are located and translated
into Internet Protocol (IP)
addresses.
If your ISP provided at least one DNS Server IP Address, type that IP
Address in the Primary DNS address fields. You may also enter another
DNS Server IP Address; the Router will utilize these simultaneously for
quicker access to functioning DNS Servers.
1-4 Status
When you finish the Quick Setup, the Status screen will display the
connection status for the Broadband Router's WAN/LAN interfaces,
firmware and hardware version numbers, and the number of connected
clients to the network.
22