Fastening Amphenol Type Connector - Panasonic KX-TDA100 Installation Manual

2.2 Installation of the Hybrid IP-PBX
2.2.9

Fastening Amphenol Type Connector

An Amphenol 57JE type connector is used on some of the optional service cards.
To connect an Amphenol connector, use the spring latch or screw to fix the upper part and use Velcro® tape
to fix the lower part of the connector.
Spring
Latch
56 Installation Manual
Velcro
Tape
1
2
Velcro
Tape
1
Spring
Latch
2
1
Insert the screw (included
with the Amphenol or
optional service card).
2
Remove the
screw on the
optional service
card.