2.2.10 Fastening Amphenol Type Connector - Panasonic KX-TDA30 Installation Manual

2.2.10 Fastening Amphenol Type Connector

An Amphenol 57JE type connector is used on some of the optional service cards.
To connect an Amphenol connector, use the spring latch or screw to fix the upper part and use
Velcro® tape to fix the lower part of the connector.
Spring
Latch
2.2 Installation of the Hybrid IP-PBX — KX-TDA100/KX-TDA200
Velcro
Tape
1
2
Velcro
Tape
1
Spring
Latch
2
1
Insert the screw (included
with the Amphenol or
optional service card).
2
Remove the
screw on the
optional service
card.
Installation Manual 57