Site Survey - Panasonic KX-TDA100 Installation Manual

2.8.5

Site Survey

The PS has a Radio Signal Test mode that monitors the state of the radio link to the CS. After installing the
CSs temporarily, set the PS to the Radio Signal Test mode and measure each CS coverage area. Then,
record the results on the map of the installation site.
Testing the Radio Signal Strength
Note
The display language for the site survey is available only in English.
1.
Enter the Radio Signal Test mode.
Using the KX-TD7680
Press 1, 9, and POWER
for more than 2 seconds.
To store the scan data
Scan Data No.
Using the KX-TD7690
Press 1, 9, and POWER
for more than 2 seconds.
To store the scan data
Scan Data No.
Notes
*1: CS number and radio signal strength level.
*2: Scan data (test result) number. Empty memory space will be indicated by a number; stored memory
space will be indicated by a "-".
CS No.
1 to 9
0 to 9
CS No.
1 to 9
0 to 9
2.8 Connection of 2.4 GHz Portable Stations
Display example:
CS NO.1 LEVEL:12
<< SEARCHING >>
SAVE:0123456789
Display example:
CS NO.1 LEVEL:12
<< SEARCHING >>
SAVE:0123456789
*
1
*
2
*
1
*
2
Installation Manual 129