Clock Set/Adjustment; Direct Station Selection - Iwatsu ENTERPROSE-CS Owner's Manual

Clock Set/Adjustment

Allows you to change the time for the system clock.
To change the time:
 Press the Speaker key SPKR
 Wait for the dial tone
 Press the Feature key FEAT then dial
CLOCK if assigned as a key
 Dial the time in military time H H : M M
 Wait for a confirmation tone
 Press the Speaker key SPKR
To adjust seconds to zero:
 Press the Speaker key SPKR
 Wait for the dial tone
 Press the Feature key FEAT then dial
 Or
 Press the Clock key CLOCK if assigned as a key

 Dial
to adjust seconds to zero

 Dial
again to start the clock with zero seconds
 Wait for a confirmation tone
 Press the Speaker key SPKR
If the seconds shown on the DSS are less than 30, the minutes digit will remain
the same. If the seconds shown on the DSS are greater than 30, the minutes
digit will advance one digit.

Direct Station Selection

Direct Station Selection allows you to have one-touch access to call extensions
When you wish to call an extension:
 Lift the receiver
 Wait for the dial tone
 Press the Direct Station Selection key for the desired extension
ATTENDANT POSITION USER GUIDE - 182

, or, press the Clock key
