Direct Outside Line Appearance - Iwatsu ENTERPROSE-CS Owner's Manual

Delayed Ringing
When an incoming outside line call is not answered within a pre-set time, a
second group of stations start ringing and the ringing signal changes to an
incoming alarm. A delayed ringing assignment can be programmed for each
line. This assignment is the same for both Day and Night modes. If the line is
programmed for attendant outside line intercept, the primary and delayed
ringing stations will stop ringing when attendant intercept occurs.
DID Number External Call Forward
A station programmed for direct termination of a DID, Caller ID, ANI, or
DNIS call can be set to automatically forward the call to an external (remote)
telephone number. The remote telephone number is programmed in personal
speed dial bin 98. This feature will not operate if there is no number
programmed in person speed dial bin 98.
To set/cancel external call forward of DID, Caller ID, ANI and DNIS calls:
 Press ICM
 Press PTRAN
 Wait for confirmation tone
 The PTRAN key red LED is lit, remote call forward is set
 The PTRAN key is not lit, remote call forward is canceled
To program the remote number:
 Press the Feature key FEAT
 Press the Speed Dial key SPEED

 Dial Personal Speed Dial Code
 Dial the remote phone number
 Press the Feature key FEAT to end the operation

Direct Outside Line Appearance

IP and Digital Telephones may have Multipurpose keys programmed as an
outside line for incoming and outgoing calls.
 Lift the receiver
 Press the outside line key and you will hear the dial tone
IWATSU TELEPHONE USER GUIDE - 128