Answering a Call That Returns to the Attendant
Position
Calls that were transferred and not answered, on Hold or Call Park too long,
will ring and light the lamp on the Recall key RECALL at the Attendant
Position.
To answer a call that returns to the Attendant Position:
Lift the receiver
Press the red flashing Recall key RECALL
Making an Outgoing Call
Lift the receiver
Press the desired outside line and the lamp will flash green
Wait for the dial tone
Dial the desired phone number
Making an Intercom Call
Lift the receiver
Wait for the dial tone
Dial the desired extension number, or,
Press the designated key for the desired extension number on the Direct
Station Selection Unit
ATTENDANT POSITION USER GUIDE - 178